Accelerator For UP Resin Curing
A special accelerator use to cure unsaturated polyester. Has a very good characteristic in low temperature or high humidity curing and with excellent strength after cured.
ADVANTAGES
Cost Saving - Dosage is only 1/2-2/3 of normal Cobalt Salt but maintain the same curing time and provide additional strength after cured.
Applicable to low temperature SWANCOR 1300 will give short curing time in low temperature without affect the hardness build up of Barcol.
Increase physical properties of FRP.
Example: at 25°C, with 1% of MEKPO in ISO polyester.
Cobalt Salt dosage % |
0.2 |
0.4 |
0.6 |
||||||
Curing Characteristic |
GT |
CT |
PT |
GT |
CT |
PT |
GT |
CT |
PT |
SWANCOR 1300 |
48.5 |
70.3 |
145 |
15.1 |
27.1 |
165 |
7.5 |
16.4 |
167 |
Normal 6% Cobalt Salt |
58.3 |
82.0 |
130 |
27.8 |
45.4 |
150 |
26.4 |
43.2 |
156 |
GT=Gel time (minute)
CT=Curing time (minute)
PT=Peak temperature (°C)
PACKAGE
25kg Pail
200kg Drum
Containers, not completely emptied must be closed immediately after use.