Vinyl Ester Resin for Marine

Product

Solid Content
(%)

Viscosity
(cps)*¹

HDT (℃)

Shelf Life
(Month)*²

Characters

SWANCOR 901 -TP

-

400~600

108~112

3

SWANCOR 901-TP is a Bisphenol-A type pre-thixotroped pre-promoted epoxy vinyl ester resin.

Provides excellent corrosion resistance to a broad range of organic and inorganic acids, alkalis, oxidizing chemicals and salt solutions etc.

Provides very good mechanical strength while incorporated with reinforcement such glass fiber, carbon fiber or kevler fiber etc.

Can comply with US FDA regulation.

DNV and Lloyd's register approval for marine.

Can be easily applied by hand lay-up laminating, spray-up, and filament winding.

SWANCOR 901-V

52

150~350

100~105

6

SWANCOR 901-V is a Low viscosity Bisphenol-A type epoxy vinyl ester resin.

Provides excellent corrosion resistance to a broad range of organic and inorganic acids, alkalis, oxidizing chemicals and salt solutions, etc.

Provides very good mechanical strength while incorporated with reinforcement such glass fiber, carbon fiber or kevler fiber etc.

Can comply with US FDA regulation.

DNV and Lloyd's register approval for marine.

Can be easily applied by spray-up, pultrusion, resin transfer molding (RTM), filament winding and vacuum infusion.

SWANCOR
901-200

56

120~280

102~105

3

Low viscosity

Excellent mechanical properties

Excellent anti-corrosion performance

SWANCOR 905-2P

58

400~600

106~110

3

SWANCOR 905-2P is a Brominated Bisphenol-A type epoxy vinyl ester resin offers excellent flame retardancy for FRP applications.

Provides excellent corrosion resistance to a broad range of organic and inorganic acids, alkalis, oxidizing chemicals and salt solutions, etc.

Provides very good mechanical strength while incorporated with reinforcement such glass fiber, carbon fiber or kevler fiber etc.

ASTM E84 Class 1 can be achieved while incorporated with 3-5% antimonytrioxide.

Can comply with US FDA regulation 21 CFR 177.2440.

Can be easily applied by hand lay-up laminating, spray up, pultrusion, resin transfer molding (RTM) and filament winding.

SWANCOR CHEMPULSE 907-P

61

400~600

144~150

3

SWANCOR 907- P is a Novolac type epoxy vinyl ester resin. Combines superior retention of mechanical properties at high temperature.

Provides excellent corrosion resistance to a broad range of chemical mixture, oxidizing chemicalsand solvents etc.

Can be used in polymer concrete casting.

Can comply with US FDA regulation 21 CFR 177.2440.

Can be easily applied by hand lay-up laminating, sprayup,pultrusion, resin transfer molding (RTM) and filament winding.

SWANCOR
908-P

55

350~550

105-112

3

SWANCOR 908-P is a elastomer modified epoxy vinyl ester resin.It provides higher elongation than Bisphenol-A type resins.

The advantages of high elongation include increased adhesion strength to substrate, superior impact strength over market vinyl ester resins, superior abrasion and stress resistance.

Good corrosion resistance to broad range of organic and inorganic acids, alkalis,oxidizing chemicals and salt solutions etc.

Can be easily applied by hand lay-up laminating, sprayup,pultrusion, resin transfer molding (RTM) and filamentwinding.

SWANCOR 980-P

55

300~500

76~82

3

SWANCOR 980 is an elastomer modified epoxy vinyl ester resin. It provides excellent elongation of FRP laminates.

Advantages of high elongation include increased adhesion strength to substrate, superior impact strength , superior abrasion and stress resistance.

Good corrosion resistance to a broad of organic and inorganic acids, alkalis, oxidizing chemicals and salt solutions etc.

Can be easily applied by hand lay-up laminating, spray-up, pultrusion, resin transfer molding (RTM) and filament winding.