eng Русский язык

Cement Remover

CEMENT REMOVER is an effective acid based liquid mixture specifically designed to deal with hard cases of cement cargo deposits or dry cement stains. Its proven advantage is the provision of immediate penetration and complete dissolution of cement, the result being a thorough cleaning.

Characteristics, Advantages & Applications

  • Ideal for the removal of cement deposits and dry stains.
  • Acts quickly and thoroughly.
  • It is applicable to all metal surfaces and parts except those being galvanized and those made of Tin, Zinc and Aluminum.
  • It is a water-soluble and non-flammable liquid mixture.
  • Safe to use on rubber and plastic compounds.
  • Can be combined with a specific range of other products.
  • Replaces the use of other products, which fail to treat awkward situations like the removal of salt deposits and other hard deposits such as rust.
  • Cost effective, easy to apply and use.

During 1996, chemical tankers were only permitted to use tank cleaning agents, which had been approved and evaluated by the International Maritime Organisation (IMO). CEMENT REMOVER was evaluated through IMO’s Working Group on the Evaluation of Safety and Pollution Hazards of Chemicals (ESPH Working Group) and found to meet the requirements of paragraph 1.8.2 of the P&A Standards.

Physical Properties

CEMENT REMOVER is an aqueous acid liquid solution assisting in the neutralization of basic systems also used for the pickling and cleaning of metal parts.

Appearance / Color Clear, colorless liquid
Odor Pungent
Specific gravity 1.16/15°C
pH 1
Solubility Appreciable
Order No Size (in litres) Container
833008 30 Plastic jerrican
832108 210 Steel drum

Application and Use

A. Dosing Procedure

Undiluted: In cases where we deal with heavy deposit build-up, CEMENT REMOVER must be applied undiluted.

Diluted: In cases of light deposition, on large surface areas, a solution between 10-40% may be used.

B. Cleaning Procedure

Undiluted/Diluted: In parts such as corner cavities, tank skeleton inlets, etc, CEMENT REMOVER must be carefully poured and/or applied by conventional means such as a hard brush, mop, sponge or any other manual devices feasible to move with rapid and irregular action. Let it soak for 15 minutes. Afterwards, wash thoroughly by applying high-pressure water source. In case of deposit persistence, repeat the cleaning procedure.

Important Information

Cement remover is considered a highly corrosive product. Operators must consult the Safety and Handling instructions table before use.

Safety and Handling

HANDLING Handle with care. Store in a dry, cool and well ventilated environment.
SAFETY IMMEDIATE ACTIONS
Eye Contact Avoid Eye contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention.
Skin Contact Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water. Seek medical attention.
Inhalation Avoid inhalation of vapors. Otherwise, seek fresh air source at once. Seek medical attention.
If Swallowed Avoid ingestion. Otherwise, consume a considerable quantity of water. Do not induce vomiting. Seek medical attention.
GENERAL INSTRUCTIONS Avoid spillage, splashing and mishandling. Precautionary measures for body protection are strongly recommended before use.

Read the Material Safety Data Sheet before using this product.

For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.

Яндекс.Метрика