Characteristics, Advantages & Applications
- Disperses and dissolves sludge based hydrocarbons.
- Breaks water emulsions resulting in the efficient separation from oil when centrifuged.
- Prevents sludge formation and carbonaceous deposits.
- Maintains homogeneity and stabilization of the fuel, this improves combustion.
- Can be used as a degreasing agent when required.
- Absolutely soluble in the fuel.
- Has anticorrosive properties and is highly stable.
- Cost effective, easy to handle and use.
Physical Properties
Fuel Oil Treatment is a liquid mixture of solvents, dispersants and emulsifying agents that results in a maximum performance of the treated fuel oil.
Appearance / Color | Clear, red liquid | |
---|---|---|
Odor | Strong Aromatic Solvent Odor | |
Specific gravity | 0.87/20°C | |
Flash Point | > 40°C | |
Order No | Size (in litres) | Container |
562501 | 25 | Steel drum |
562101 | 210 | Steel drum |
Application and Use
A. Dosing Procedure
The quantity suggested for fuel oil treatment is a proportion of 1 litre of F.O.T. for 4-6 cubic meters of fuel.
B. Feeding Procedure
After the quantity of F.O.T. has been determined, it must be added to the main storage tanks before fuel loading or to the deep tanks through to the entire fuel system.
IMPORTANT INFORMATION
Emulsion Formation and F.O.T.
In general, heavy oils form stable emulsions with water, a lot easier than light oils with water; these stable emulsions are difficult to break. Moreover, heavy bunker oils are contaminated with traces of water and when these are combined with condensation moisture and heavier hydrocarbons, they form emulsions. As a result, these emulsions increase the degree of sludge formation in the fuel tank and they also cause problems to the burners during combustion. Another difficulty are the separations, at low temperatures, between high molecular constituents (such as paraffin) when various types of fuels are blended. F.O.T. is specifically engineered to encounter and treat 100% of the above mentioned anomalies.
Atomization and F.O.T.
F.O.T. contains surface-active agents, which reduce the limit of surface tension between oil and air, consequently; this results in fine atomization within the burner. This way, we have a more even fuel distribution throughout the burner, thus achieving a better fuel utilization, through complete combustion. Therefore, energy is preserved by the saving of fuel.
Safety and Handling
HANDLING | Handle with care. Store in a dry, cool and well ventilated environment. |
---|---|
SAFETY | IMMEDIATE ACTIONS |
Eye Contact | Avoid Eye contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention. |
Skin Contact | Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water. Seek medical attention. |
Inhalation | Avoid inhalation of vapors. Otherwise, seek fresh air source at once. Seek medical attention. |
If Swallowed | Avoid ingestion. Otherwise, consume a considerable quantity of water. Do not induce vomiting. Seek medical attention. |
GENERAL INSTRUCTIONS | Avoid spillage, splashing and mishandling. Precautionary measures for body protection are strongly recommended before use. |
Read the Material Safety Data Sheet before using this product.
For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.