eng Русский язык

Electroclean A Quick Dry

ELECTROCLEAN A QUICK DRY is a concentrated, chlorinated dry solvent liquid solution designed to remove oil, grease and carbonaceous deposits from electrical parts and equipment. It provides immediate and effective removal with a high evaporation rate.

Characteristics, Advantages & Applications

  • Removes and carries all kinds of oil, grease and carbonaceous deposits from major electrical parts and motor equipment.
  • Non-flammable, non-corrosive and non-conductive.
  • May be used with a specific range of products.
  • Can be safely used on painted or varnished metal surfaces.
  • No need to be rinse off after it has been applied.
  • Leaves no stains or dry dirt behind.
  • Cost effective, easy to apply and ready to use.

Physical Properties

ELECTROCLEAN A QUICK DRY is a blend of vaporous, volatile chlorinated solvent and powerful degreasers, non-flammable, non-corrosive and non-conductive.

Appearance / Color Clear, colorless liquid
Odor Ethereal
Specific gravity 1.25/15°C
Flash Point >100°C
Vapor Density Heavier than air
Stability Very stable under standard, normal conditions
Order No Size (in litres) Container
832510 25 Steel drum

Application and Use

A. Dosing Procedure

The quantity of ELECTROCLEAN A QUICK DRY to be used is not specified due to the variations in its application and the specifics involved with isolated cases. Therefore, the operator/user is the one to judge the quantity needed depending on the degree of cleaning required in that particular case.

B. Cleaning Procedure

Once the quantity of ELECTROCLEAN A QUICK DRY has been determined, apply to contaminated parts/equipment by brushing and/or wiping with a piece of thick cloth. All applications must be carried out in areas that are properly ventilated; this is due to the nature of the product.

Note that, after use, the product must always be well sealed in its metallic drum.

Safety and Handling

HANDLING Handle with care. Store in a dry, cool and well ventilated environment.
SAFETY IMMEDIATE ACTIONS
Eye Contact Avoid Eye contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention.
Skin Contact Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water. Seek medical attention.
Inhalation Do not breathe gas/vapors. Otherwise, seek fresh air source at once. Seek medical attention. In case of insufficient ventilation, wear suitable respiratory equipment.
If Swallowed Avoid ingestion. Otherwise, consume a considerable quantity of water. Do not induce vomiting. Seek medical attention.
GENERAL INSTRUCTIONS Avoid spillage, splashing and mishandling. Precautionary measures for body protection are strongly recommended before use.

Read the Material Safety Data Sheet before using this product.

For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.

Яндекс.Метрика