eng Русский язык

Hand Cleaner

HAND CLEANER is a multi-purpose heavy duty cleaning gel mixture used by commercial and industrial companies as a common dirt and grease remover. Its powerful formula ensures quick and thorough cleaning after any mechanical process where the engineer has been manually involved. Its content of cosmetic cleaners, safe degreasers, heavy duty detergent agents and light stone micro granules make HAND CLEANER one of the most effective and safe products on the market.

Characteristics, Advantages & Applications

  • Highly effective at general-purpose hand cleaning/degreasing.
  • Safe to use and apply even in the most sensitive cases.
  • Removes all known kinds of dirt.
  • Acts as a bacteria controller and eliminates odors.
  • Can be used daily.
  • Non corrosive, non toxic, non flammable and non oxidizing.
  • pH stabilized, thus it acts as an acid and alkali neutralizing agent.
  • May be combined with a specific range of products.
  • Easy to rinse off as water soluble.
  • Cost effective, easy to apply and use.

Physical Properties

HAND CLEANER is a concentrated paste, blended with detergent agents, cosmetic cleaners, degreasers and light stone micro granules. It is also pH stabilized.

Apprearance / Color Light orange gel
Odor Lemon scent
Specific gravity 0.90-1.00/15°C
pH 7
Solubility Appreciable
Order No Size (in litres) Container
830501 5 Plastic pail

Application and Use

A. Dosing Procedure

The quantity of HAND CLEANER to be used depends on the degree of contamination along with the desired degree of cleaning by the engineer. Thus, under normalconditions a small quantity of 5-10 grs is sufficient to apply. In difficult cases, bigger quantities may be required and repetition of the cleaning procedure might also be necessary.

B. Cleaning Procedure

HAND CLEANER is applied in its original form. Once the quantity is determined, the engineer must rinse off his hands with water so as the chunk deposits are removed beforehand. Thereafter, hand cleaner is applied and the vigorous rubbing of the hands is necessary to accomplish deep and thorough dirt penetration. When a couple of minutes have elapsed, the engineer must rinse off with plenty of water and wipe dry with a towel. The cleaning procedure can be repeated if necessary. Note that hand cleaning may be assisted by the use of a brush and/or a sponge.

Safety and Handling

HANDLING Handle with care. Store in a dry, cool and well ventilated environment.
SAFETY IMMEDIATE ACTIONS
Eye Contact Avoid Eye contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention.
If Swallowed Avoid ingestion. Otherwise, consume a considerable quantity of water. Do not induce vomiting. Seek medical attention.
GENERAL INSTRUCTIONS Avoid spillage, splashing and mishandling.

Read the Material Safety Data Sheet before using this product.

For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.

Яндекс.Метрика