eng Русский язык

Omala S 3 GP

Special Application Industrial Gear Oils

Shell Omala S3 GP oils are specialist „problem solving‟ lubricants developed to lubricate industrial gearboxes subject to extremely high and heavily shock loaded operations such as those found in steel, cement, mining and quarrying industries. They are formulated for use where ultra-high levels of extreme-pressure performance are required.

Performance Benefits

Long oil life – Maintenance saving

Shell Omala S3 GP oils are formulated to resist thermal and chemical breakdown throughout the maintenance interval. They help resist the formation of sludge to provide good oil life capability even at temperatures up to 100 o C.  

Excellent wear & corrosion protection

Shell Omala S3 GP oils are formulated with high levels of extreme pressure and anti-wear additives properties to help ensure optimal gear and bearing protection even under the severest operating conditions.

Shell Omala S3 GP has excellent corrosion protection, protecting steel components, even in the presence of contamination by water and solids.

Maintaining system efficiency

Shell Omala S3 GP oils have excellent water separation properties, such that excess water can be drained easily from lubrication systems to help maintain the integrity of critical oil films and extend the life of the gears.

Applications

Highly loaded gears

Shell Omala S3 GP oils are designed for use in enclosed industrial gear systems subject to severe operating conditions including high shock loading applications

Worn or damaged gears

These oils can be used in older gear systems that may be damaged or misaligned. The extreme pressure performance provides additional protection in such applications.

Other applications

Shell Omala S3 GP oils are suitable for lubrication of bearings and other components in circulating and splash-lubricated systems

For normal load applications the other Shell Omala “G” series oils are recommended. For automotive hypoid gears, the appropriate Shell Spirax Oil should be used.

Specifications and Approvals

  • Meets ISO 12925-1 Type CKD, except ISO 680 & 1500
  • Meets ANSI/AGMA 9005-E02 (EP) 
  • Meets US Steel 224
  • Meets  DIN 51517-3 (CLP), except ISO 680 & 1500
  • Meets David Brown S1.53.101E, except ISO 680 & 1500
  • Meets Arcelor Mittal FT163
  • Omala S3 GP 1500 is included in the Bucyrus
  • Certified Lubricants List

Health and Safety

Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from your Shell representative.

Protect the Environment

Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Advice

Advice on  applications  not  covered  in  this  leaflet may  be  obtained  from  your  Shell  representative.

Typical Physical Characteristics

Shell Omala S3 GP   220 320 460 680 1500
ISO Viscosity Grade ISO 3448 220 320 460 680 1500
Kinematic Viscosity
at 40°C  mm2/s
at 100°C  mm2/s
ISO 3104  
220
19,9
 
320
25,5
 
460
31,2
 
680
38,5
 
1500
82,6
Viscosity Index ISO 2909 104 103 98 93 124
Flash Point COC  °C ISO 2592 237 239 240 242 224
Pour Point  °C ISO 3016 -18 -15 -9 -9 -21
Density at 15°C  kg/m3 ISO 12185 893 897 904 916 902
FZG-Test  Failure Load Stage FZG
A16.6/90
>12 >12 >12 >12 >12
Four Ball Weld Load kg   500 500 500 500 500

These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur.

Яндекс.Метрика