Super High Performance Diesel Engine Oil
Applications
- High-speed diesel engines operating on distillate fuels.
- N.B. Not suitable for N. American automotive type engines, for which API CF-4 type oils are required.
Performance Features
Outstanding piston cleanliness
Free-running piston rings, even under difficult operational conditions, ensuring maximum reliability.
Exceptional protection against bore polishing
Control of blow-by and oil consumption, preserving engine efficiency. SHPDO type oils are preferred by many engine manufacturers to guard against bore polishing.
Exceptional engine cleanliness
Ability to retain high levels of soot safely in suspension, even with extended drain intervals.
Oxidation resistance twice that of conventional oils
Ability to withstand high temperatures for longer, in severe service or with extended drain intervals.
High reserve alkalinity
A TBN-E (total base number) of 17 to neutralise acids and provide corrosion protection until the next drain interval, even with the higher sulphur levels sometimes found in marine distillate fuels.
Performance Specifications
API CF
Approvals and Recommendations
Shell Sirius X is approved by:
- MTU (Type II high performance category)
- CWEC (Cummins Wärtsilä Engine Company)
- MWM Deutz (high output, high speed, e.g. TBD 620)
and meets the requirements of:
- Caterpillar 3600 Series
Advice
Advice on applications not covered in this leaflet may be obtained from your Shell Representative
Health & Safety
Shell Sirius X is unlikely to present any significant health or safety hazard when properly used in the recommended application, and good standards of industrial and personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
For further guidance on Product Health & Safety refer to the appropriate Shell Product Safety Data Sheet.
Protect the environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Typical Physical Characteristics
Shell Sirius X | 30 | 40 |
SAE Viscosity Grade | 30 | 40 |
Kinematic
Viscosity 40°C, cSt 100°C, cSt |
101 11 |
139 14 |
Density 15°C, kg/l | 0,885 | 0,890 |
Flash Point, Closed Cup, °C | 218 | 230 |
Pour Point, °C | -18 | -18 |
TBN-E, mg KOH/g | 17 | 17 |
Sulphated Ash, % wt | 1,85 | 1,85 |
These characteristics are typical of current production. While future production will conform to Shell’s specification, variations in these characteristics may occur